During the construction of Universal Pipe Coating, safety matters are extremely important and must be strictly followed to ensure the safety of construction workers and the smooth progress of the construction process. The following are safety matters that need to be paid attention to during the construction of Universal Pipe Coating:
Fire safety
Coating selection: Make sure that the coating used meets the fire protection requirements and avoid using flammable and explosive coatings.
Construction site: The construction site should be away from fire sources and smoking is strictly prohibited. At the same time, sufficient fire-fighting equipment should be configured, such as fire extinguishers, fire sand, etc.
Coating storage: The coating should be stored in a cool, ventilated, and dry place, away from fire and heat sources. Obvious "No Smoking" signs should be set up in the storage area.
Ventilation and anti-toxicity
Ventilation facilities: The construction site should be well ventilated to avoid the accumulation of coating vapor. Ventilation equipment such as fans and exhaust fans can be used to increase air circulation.
Personal protection: Construction workers should wear appropriate protective equipment, such as protective glasses, gloves, masks, etc., to prevent the coating from contacting the skin and splashing into the eyes.
Emergency treatment: If you accidentally come into contact with the paint, rinse immediately with plenty of water and seek medical attention as soon as possible.
Construction operation safety
Paint dilution: When diluting the paint, follow the requirements of the product manual to avoid excessive dilution that may lead to a decrease in paint performance.
Paint stirring: When stirring the paint, special tools should be used to avoid using flammable and explosive tools or materials.
Paint coating: When applying the paint, ensure that the coating is uniform and without omissions. At the same time, construction should be avoided in rainy days or in environments with high humidity to avoid affecting the quality of the coating.
Other safety matters
Construction equipment: Construction equipment should be regularly inspected and maintained to ensure that it is in good condition.
Construction site management: Obvious safety warning signs should be set up at the construction site, and a dedicated person should be assigned to be responsible for site management.
Emergency plan: Develop a construction emergency plan to deal with possible unexpected situations.
In short, during the construction of Universal Pipe Coating, safety matters must be strictly observed to ensure the safety of construction personnel and the smooth progress of the construction process.
